Control Valves

View as Grid List
Sort by
Display per page
Picture of 2FGA series Valves

2FGA series Valves

The 2FGA series valves are used for the control of fluids belonging to group 2 (water, superheated water, steam) according to the provisions of article 13 of Directive 2014/68/EU (PED) in air conditioning, heating and civil heating systems and industrial and plants and thermal machines of industrial processes; therefore they can not be used as safety valves. The valve body is made of gray cast iron with a stainless steel plug with an equipercentual characteristic and PN16 flanged connections. Seat and plug in stainless steel AISI 303 and Teflon seals make the valve particularly suitable for the control of aggressive fluids such as saturated or overheated steam.
Picture of VMX


شیرهای مدل میکرا برای کنترل جریان آب سرد و گرم در سیستم های سرمایش و گرمایش استفاده می شوند. طراحی منحصر به فرد این سری شیرها و قابلیت نصب بسیار راحت در پایانه های حرارتی این مدل را تبدیل به یکی از بهترین انتخاب ها در بازار می کند. بدنه ی این شیر از جنس برنج و دارای فشار نامی 16 می باشد. و دارای اتصالات دنده ای ½ و ¾ ام اینچ می باشد و بخش داخلی آن از تکنو پلیمر تقویت شده ساخته شده است. توقف در مسیر ابتدا و انتهای کورس شیر به خوبی با اورینگ EPDM آب بندی شده اند که باعث می شود این شیر برای آب و ترکیب های گلیکول بسیار سازگار باشد. تمام قسمت های فلزی بیرونی، از مواد ضد زنگ ساخته شده اند، که باعث جلوگیری از زنگ زدگی شیر حتی در حضور چگالش می شوند. تمام مدل ها قابلیت مجهز شدن به پوسته های حرارتی را دارند.
Picture of VMB


VMB is a 3-way globe mixing valve with PN16 and internal threaded connections. G25 cast iron valve body. Brass plug with Contoured profiling on the direct path and V-port type on the corner path. Stem in CrNi steel with threaded end M8. Seal of the stem with EPDM O-ring and graphite teflon scraper. Used for the control or interception of water or glycol water with a mixture up to 50% in air-conditioning systems, thermoventilation and heating, civil and industrial, and in machines for the heat treatment of products. Three-way valves should be used only as mixing valves; angle way should never be used for control purposes.
Picture of VSX


Micra valves are used to control the flow of hot or cold water in heating and air conditioning systems. The innovative and patented design makes the Micra valves the most compact on the market thus allowing easy installation on the terminal units. The PN16 valve body is made of brass with 1/2 "and 3/4" threaded connections while the internal parts are made of reinforced technopolymer. The stop is perfect both on the direct way and on the corner road and is made with EPDM o-ring gaskets compatible with water and glycol mixtures. All the external metal parts are made of stainless materials ensuring the absence formation of rust even in the presence of condensation.All models can be equipped with thermal shells.